Skip navigation

Version Comparison: How to change the Remote Control timeout length

Comparing: Revision 5 » Revision 6


 
 
Color Key: Addition Deletion Change
Revision 5   By Jared Barneck at 5 years, 4 months ago Revision 6   By Dataspike at 3 years, 8 months ago

Description

Remote control sessions timeout if there is no interaction in the viewer after 10 minutes.

 

Resolution

To increase the timeout change the following registry key on the client side:

 


HKLM\System\CurrentControlSet\Services\issuser
String: ImagePath
Value: C:\PROGRA~1\LANDesk\LDClient\issuser.exe /SERVICE

 

 

Manually Changing the Registry Key

Manually changing this value is usually a quick solution for one client, however if you want this to happen to all clients, the registry key should be deployed.

 

To change this value manually follow these steps:

 

  1. Double click the value ImagePath.
     

  2. Add the following parameter to the string but replace [minutes] with the value in minutes:
     
    /a[minutes]
     
    For example, to set the timeout to 30 minutes, use /a30.
     

    
    HKLM\System\CurrentControlSet\Services\issuser
    String: ImagePath
    Value: C:\PROGRA~1\LANDesk\LDClient\issuser.exe /SERVICE /a30
    

     


 
Note: To set the client so that it never times out use /a0.
 

 

Adding This Registry Key Change to the Agent Configuration

To make this change part of the Agent Configuration use these steps listed below.

 

  1. Browse to LDLogon.
     

  2. Locate the NTSTACFG.IN# file and open it with a text editor.
     

  3. In the NTSTACFG.IN# file, locate the following section:
     

    
    [Remote Control Post Copy]
    


     

  4. Add the following three line below the section:

    
    [Remote Control Post Copy]
    REG001=HKEY_LOCAL_MACHINE, System\CurrentControlSet\Services\issuser\ImagePath, C:\PROGRA~1\LANDesk\LDClient\issuser.exe /SERVICE /a30 , , REG_SZ
    EXEC1002=%DEST%\ISSUSER.EXE, /STOP
    EXEC1003=%DEST%\ISSUSER.EXE, /START
    


     

  5. On the Core Server, run this command to move the changes from the NTSTACFG.IN# file to the NTSTACFG.INI file:
     
    LANDesk\ManagementSuite\stamper.exe
     

  6. Apply the changes to the NTSTACFG.INI file to all the agent configuration INI files using these steps:
     

    1. Open the LANDesk console.
       

    2. Go to Tools | Configuration | Agent Configuration.
       

    3. Click on the Rebuild All icon
       

 

Description

Remote control sessions timeout if there is no interaction in the viewer after 10 minutes.

 

Resolution

To increase the timeout change the following registry key on the client side:

 

HKLM\System\CurrentControlSet\Services\issuser String: ImagePath Value: C:%PROGRAMFILES%\PROGRA~1\LANDesk\LDClient\issuser.exe /SERVICE

 

 

Manually Changing the Registry Key

Manually changing this value is usually a quick solution for one client, however if you want this to happen to all clients, the registry key should be deployed.

 

To change this value manually follow these steps:

 

  1. Double click the value ImagePath.

 


  1. Add the following parameter to the string but replace [minutes] with the value in minutes:
     
    /a[minutes]
     
    For example, to set the timeout to 30 minutes, use /a30.

 

  1. HKLM\System\CurrentControlSet\Services\issuser String: ImagePath Value:
C:
  1. %PROGRAMFILES%\
PROGRA~1\
  1. LANDesk\LDClient\issuser.exe /SERVICE /a30
  1.  



 

Note:To set the client so that it never times out use /a0.


 

 

Adding This Registry Key Change to the Agent Configuration

To make this change part of the Agent Configuration use these steps listed below.

 

  1. Browse to LDLogon.

 


  1. Locate the NTSTACFG.IN# file and open it with a text editor.

 


  1. In the NTSTACFG.IN# file, locate the following section:

 

  1. [Remote Control Post Copy]
 


  1. Add the following three line below the section:

  1. [Remote Control Post Copy] REG001=HKEY_LOCAL_MACHINE, System\CurrentControlSet\Services\issuser\ImagePath,
C:
  1. %PROGRAMFILES%\
PROGRA~1\  
  1. LANDesk\LDClient\issuser.exe /SERVICE /a30 , , REG_SZ EXEC1002=%DEST%\ISSUSER.EXE, /STOP EXEC1003=%DEST%\ISSUSER.EXE, /START


  1. On the Core Server, run this command to move the changes from the NTSTACFG.IN# file to the NTSTACFG.INI file:
     
    LANDesk\ManagementSuite\stamper.exe

 


  1. Apply the changes to the NTSTACFG.INI file to all the agent configuration INI files using these steps:

 


    1. Open the LANDesk console.

 


    1. Go to Tools | Configuration | Agent Configuration.

 


    1. Click on the Rebuild All icon

 

 



LANDESK Community powered by Jive SBS® 4.5.7.1  |  Legal Notices  |  Privacy Policy  |  Icon 

TweeterOn Twitter  |  Icon FacebookOn Facebook © 2007 LANDESK Software