I have recently upgraded LANDesk Management Suite 9 TVT from SP2 to SP3 thinking it will make Provisioning/Imaging stable. In fact it is worse, now HII is not working correctly which means on some machines Sata or NICs drivers are not injecting even though i know they are the correct drivers from the lenovo website. This really puts me in a awkward situation.
Surely there must be others out there having the same issues as me. How are you getting around it?
Take a look at this thread: http://community.landesk.com/support/message/74125#74125
Also, check the patches available : http://community.landesk.com/support/docs/DOC-24787
There are issues involved.Also take a look at this ER : http://community.landesk.com/support/ideas/2717
Ultimately, it's well worth you logging your issues with LANDesk support on this. HII went through a major change and ideally you should have tested this before going into production. If you saved files during upgrade you should still have an option to roll back if needed.
LANDesk Silver ESP
The One-Stop Shop for LANDesk Enhancements
Definitely get a case logged and make sure we're aware of this. If you have drivers that are not installing that should be we need to know which ones they are and get that figured out. Any detection problems need to come to our attention or we can't fix them.
Definitely apply the hotpaches already listed because they have a lot of fixes in them already and they also improve logging dramatically, making troubleshooting problems a lot easier.